Vai al contenuto principale

Come contare i clic totali in una cella specificata in Excel?

Questo articolo parla del conteggio dei clic totali in una cella specificata in Excel.

Contare i clic totali in una cella specificata con il codice VBA

Contare i clic totali in una cella specificata con il codice VBA

Si prega di fare quanto segue per contare i clic totali in una cella specificata in Excel.

1. Nel foglio di lavoro contiene la cella necessaria per contare i clic totali, fare clic con il pulsante destro del mouse sulla scheda del foglio, quindi fare clic su Visualizza codice dal menu di scelta rapida.

2. Nel Microsoft Visual Basic, Applications Edition finestra, copia e incolla sotto il codice VBA nella finestra del codice.

Codice VBA: conta i clic totali in una cella specificata in Excel

Public xRgS, xRgD As Range
Public xNum As Long
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
    On Error Resume Next
    If Target.Cells.Count > 1 Then Exit Sub
    Set xRgS = Range("E2")
    If xRgS Is Nothing Then Exit Sub
    Set xRgD = Range("H2")
    If xRgD Is Nothing Then Exit Sub
    If Intersect(xRgS, Target) Is Nothing Then Exit Sub
    xNum = xNum + 1
    xRgD.Value = xNum
End Sub

Note:: Nel codice, E2 è la cella di cui hai bisogno per contare i suoi clic totali e H2 è la cella di output del conteggio. Si prega di cambiarli come necessario.

3. premi il altro + Q i tasti per chiudere il file Microsoft Visual Basic, Applications Edition finestra.

D'ora in poi, quando si fa clic sulla cella E2 in questo foglio di lavoro specificato, i clic totali verranno compilati automaticamente nella cella H2 come mostrato nell'immagine sottostante. Ad esempio, se fai clic sulla cella E2 5 volte, il numero 5 verrà visualizzato nella cella H2.

I migliori strumenti per la produttività in ufficio

🤖 Assistente AI di Kutools: Rivoluziona l'analisi dei dati basandosi su: Esecuzione intelligente   |  Genera codice  |  Crea formule personalizzate  |  Analizzare i dati e generare grafici  |  Richiama le funzioni di Kutools...
Funzioni popolari: Trova, evidenzia o identifica i duplicati   |  Elimina righe vuote   |  Combina colonne o celle senza perdere dati   |   Round senza formula ...
Super ricerca: VLookup a criteri multipli  |   VLookup a valori multipli  |   VLookup su più fogli   |   Ricerca fuzzy ....
Elenco a discesa avanzato: Crea rapidamente un elenco a discesa   |  Elenco a discesa dipendente   |  Elenco a discesa a selezione multipla ....
Gestore di colonna: Aggiungi un numero specifico di colonne  |  Sposta colonne  |  Attiva/disattiva lo stato di visibilità delle colonne nascoste  |  Confronta intervalli e colonne ...
Funzionalità in primo piano: Messa a fuoco della griglia   |  Vista di progettazione   |   Grande barra delle formule   |  Gestore di cartelle di lavoro e fogli   |  Resource Library (Testo automatico)   |  Date picker   |  Combina fogli di lavoro   |  Crittografa/decrittografa le celle   |  Invia e-mail per elenco   |  Super filtro   |   Filtro speciale (filtro grassetto/corsivo/barrato...) ...
I 15 migliori set di strumenti:  12 Testo Strumenti (aggiungi testo, Rimuovi personaggi, ...)   |   50+ Grafico Tipi (Diagramma di Gantt, ...)   |   40+ Pratico Formule (Calcola l'età in base al compleanno, ...)   |   19 Inserimento Strumenti (Inserisci il codice QR, Inserisci immagine dal percorso, ...)   |   12 Conversione Strumenti (Numeri in parole, Conversione di valuta, ...)   |   7 Unisci e dividi Strumenti (Combina righe avanzate, Celle divise, ...)   |   ... e altro ancora

Potenzia le tue competenze di Excel con Kutools per Excel e sperimenta l'efficienza come mai prima d'ora. Kutools per Excel offre oltre 300 funzionalità avanzate per aumentare la produttività e risparmiare tempo.  Fai clic qui per ottenere la funzionalità di cui hai più bisogno...

Descrizione

Office Tab porta l'interfaccia a schede in Office e semplifica notevolmente il tuo lavoro

  • Abilita la modifica e la lettura a schede in Word, Excel, PowerPoint, Publisher, Access, Visio e Project.
  • Apri e crea più documenti in nuove schede della stessa finestra, piuttosto che in nuove finestre.
  • Aumenta la produttività del 50% e riduce ogni giorno centinaia di clic del mouse!
Comments (31)
No ratings yet. Be the first to rate!
Nirvan
Nirvan
This comment was minimized by the moderator on the site
Hi.
thanks for your amazing code.
as i use this, the counter get restarted every time i open the file,
is there any solution for this issue?
i need to see thclick counts in a larger time window

thanks in advance
Reply
Report
0
0
crystal
crystal     Nirvan
This comment was minimized by the moderator on the site
Hi Mehrdad,
I am sorry to reply to you so late. The following code can help solve your problem. Every time you open the file, the counter will start counting from the last counted number.

Public xRgS, xRgD As Range
'Updated by Extendoffice 20230407
Public xNum As Long
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
    On Error Resume Next
    If Target.Cells.Count > 1 Then Exit Sub
    Set xRgS = Range("E2")
    If xRgS Is Nothing Then Exit Sub
    Set xRgD = Range("H2")
    If xRgD Is Nothing Then Exit Sub
    If Intersect(xRgS, Target) Is Nothing Then Exit Sub
    xNum = xRgD.Value
    xNum = xNum + 1
    xRgD.Value = xNum
End Sub
Reply
Report
0
0
jose maria
jose maria
This comment was minimized by the moderator on the site
Hola. Muchas gracias por los códigos.
Me gustaría saber cómo contar las veces que se hace clic sobre un enlace en una celda.
Muchas gracias.
Reply
0
0
crystal
crystal     jose maria
This comment was minimized by the moderator on the site
Hi jose maria,
To count the clicks on a hyperlink, you can try the following VBA code.
Suppose hyperlinks are in column A and you want the number of clicks to be populated in the corresponding cell of column B (as shown in the screenshot below)
Please put the following code in the worksheet (code) window.

Private Sub Worksheet_FollowHyperlink(ByVal Target As Hyperlink)
'Updated by Extendoffice 20220805
    Dim Hyperlink As Range
    Set Hyperlink = Target.Range

    Hyperlink.Offset(0, 1) = Hyperlink.Offset(0, 1) + 1
End Sub

https://www.extendoffice.com/images/stories/comments/comment-picture-zxm/clicks_on_a_hyperlink.png
Reply
Report
0
0
DUFOUR
DUFOUR
This comment was minimized by the moderator on the site
Bonjour ,
j'aimerai comment je pourrais le nombre de clics sur les cellules D10 à M10 et le retranscrire à la ligne R10 et le faire pour toutes les lignes suivante donc compter les clics sur les cellules D11 à M11 et le transcrire à la ligne R11 etc etc ?

Cordialement
Reply
0
0
crystal
crystal     DUFOUR
This comment was minimized by the moderator on the site
Hi DUFOUR,
To count the number of clicks from D10 to M10 and output the total number of clicks in R10, you can apply the following VBA code to get it done.
Note: In the code, the range "D10:M30" means that the code only works from the row 10 to row 30, so please specify the rows you want to count.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
'Updated by Extendoffice 20220609
    Dim xNum As Long
    Dim xRgCount, xRg As Range
    
    On Error Resume Next
    If Target.Cells.Count > 1 Then Exit Sub

    Set xRg = Range("D10:M30")
    If Intersect(xRg, Target) Is Nothing Then Exit Sub
    Set xRgCount = Range("R" & Target.Row)
    
    If IsNumeric(xRgCount.Value) Then
        xNum = xRgCount.Value + 1
    Else
        xNum = 1
    End If
    xRgCount.Value = xNum
End Sub
Reply
Report
0
0
Sid
Sid
This comment was minimized by the moderator on the site
Is there a way to backtrack the number count? For exemple: I'd made 5 clicks, but I just wanted 3. So I change the number in the cell to 3, and when I click again, it continues from 3. OR have the ability to press another cell and decrease the count by 1 if that is easier.
Reply
0
0
Andy
Andy
This comment was minimized by the moderator on the site
Hi, thank you for these VBA codes, they almost work for my needs. I fear the fact I need to go past double digits means it will not work. I need to have C8 through to C110 and the corresponding tally count being L8 through to L110. Can you help? Many thanks in advance.
Reply
0
0
crystal
crystal     Andy
This comment was minimized by the moderator on the site
Hi Andy,The following VBA code can do you a favor. Please have a try.<div data-tag="code">Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim xRgS, xRgD As Range
Dim xStrRg As String
Dim xCStr, xVStr As String
Dim xItem As Integer
xCStr = "C8:C110" 'The range of cells you want to record the clicks of each cell
xVStr = "L8:L110" 'The range of cells to place the records in
Set xRgS = Range(xCStr)
Set xRgD = Range(xVStr)
If Not (Intersect(xRgS, Target) Is Nothing) Then
xItem = Target.Row - xRgS.Item(1).Row + 1
xRgD.Item(xItem).Value = xRgD.Item(xItem).Value + 1
End If
End Sub
Reply
Report
0
0
yoniweis324@gmail.com
This comment was minimized by the moderator on the site
Hi, I'm trying to find a way of counting the number of times 20 different cells are being clicked (each one should be counted separately). I came across your VBA code suggestion, tried to adjust it to my specific needs but it won't work. can you please advise how the code should be written? the cells that I would like to count and the cells that the values should appear in are: F12>AU12, F13>AU13, G12>AV12, G13>AV13, H10>AW10, H11>AW11, H12>AW12, H13>AW13, H14>AW14, H15>AW15, I10>AX10, I11>AX11, I12>AX12, I13>AX13, I14>AX14, I15>AX15, J12>AY12, J13>AY13, K12>AZ12, K13>AZ13).
This is the VBA code I've tried with no success:

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim xRgArray As Variant
Dim xNum
Dim xStrR, xStrS, xStrD As String
Dim xRgS, xRgD As Range

Dim xFNum As Long
xRgArray = Array("F12,AU12", "F13,AU13", "G12,AV12", "G13,AV13", "H10,AW10", "H11,AW11", "H12,AW12", "H13,AW13", "H14,AW14", "H15,AW15", "I10,AX10", "I11,AX11", "I12,AX12", "I13,AX13", "I14,AX14", "I15,AX15", "J12,AY12", "J13,AY13", "K12,AZ12", "K13,AZ13")
On Error Resume Next
If Target.Cells.Count > 1 Then Exit Sub
For xFNum = LBound(xRgArray) To UBound(xRgArray)
xStrR = xRgArray(xFNum)
xStrS = ""
xStrS = Left(xStrR, 2)
xStrD = ""
xStrD = Right(xStrR, 2)
Set xRgS = Nothing
Set xRgS = Range(xStrS)
If TypeName(xRgS) <> "Nothing" Then
Set xRgD = Nothing
Set xRgD = Range(xStrD)
If TypeName(xRgD) <> "Nothing" Then
If TypeName(Intersect(xRgS, Target)) <> "Nothing" Then
xRgD.Value = xRgD.Value + 1
End If
End If
End If
Next
End Sub

Thank you in advance, for your help.
Reply
Report
0
0
crystal
crystal    
This comment was minimized by the moderator on the site
Hi,The below code can help. Please have a try. Thank you.<div data-tag="code">Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim xRgS, xRgD As Range
Dim xStrRg As String
Dim xFNum As Integer
Dim xArr1, xArr2
If Target.Cells.Count > 1 Then Exit Sub
xStrRg = "F12-AU12; F13-AU13; G12-AV12; G13-AV13; H10-AW10; H11-AW11; H12-AW12; H13-AW13; H14-AW14; H15-AW15; I10-AX10; I11-AX11; I12-AX12; I13-AX13; I14-AX14; I15-AX15; J12-AY12; J13-AY13; K12-AZ12; K13-AZ13"
On Error Resume Next
xArr1 = Split(xStrRg, ";")
For xFNum = 0 To UBound(xArr1)
xArr2 = Split(xArr1(xFNum), "-")
Set xRgS = Range(xArr2(0))
Set xRgD = Range(xArr2(1))
If Not (Intersect(xRgS, Target) Is Nothing) Then
xRgD.Value = xRgD.Value + 1
End If
Next
End Sub
Reply
Report
0
0
KeHGC
KeHGC     crystal
This comment was minimized by the moderator on the site
Crystal, The Above code is great for the sheet I am working with, thank you. But I have a question about adding a time macro so that everyday (excluding weekends) the tally moves to the next row in the sheet for example:

Row 3 - 7/1/2021 "B1-B3; C1-C3; D1-D3"
Row 4 - 7/2/2021 "B1-B4; C1-C4; D1-D4"
Row 5 - 7/3/2021 "B1-B5; C1-C5; D1-D5"

If this is possible? thx, Ken
Reply
Report
0
0
Ken H
Ken H     crystal
This comment was minimized by the moderator on the site
The Above corrected code is great for the sheet I am working with, thank you. But I have a question about adding a time macro so that everyday (excluding weekends) the tally moves to the next row in the sheet for example:
Row 3 - 7/1/2021 "B1-B3; C1-C3; D1-D3"Row 4 - 7/2/2021 "B1-B4; C1-C4; D1-D4"Row 5 - 7/3/2021 "B1-B5; C1-C5; D1-D5"
Reply
0
0
Rennan Farias
Rennan Farias
This comment was minimized by the moderator on the site
Como zerar a contagem? How to reset the score?
Reply
0
0
crystal
crystal     Rennan Farias
This comment was minimized by the moderator on the site
Hi,
If you want to reset the counter, please add the below VBA code at the end of the original code which has been provided above, and then run it.

Sub ClearCount()
xRgD.Value = ""
xNum = 0
End Sub
Reply
Report
0
0
Barbara
Barbara
This comment was minimized by the moderator on the site
Can you provide a code that allows counting clicks from A2, B2 cells through A14, B14 cells. Thanks in advance.
Reply
0
0
crystal
crystal     Barbara
This comment was minimized by the moderator on the site
Hi Barbara,
Do you mean counting the total clicks in range A2:B14? Or clicks for each cell in range A2:B14?
Reply
Report
0
0
Andrés
Andrés
This comment was minimized by the moderator on the site
Hola
Hay alguna manera de programar el conteo de clicks de acuerdo a la fecha, es decir programar varias celdas para que cuenten con la fecha del día?
Reply
0
0
Demetrius
Demetrius
This comment was minimized by the moderator on the site
Hello, there is a way to back the counting for any number that I want? For exemple: I'd made 5 clicks, but i just wanted 3. So I change the number in the cell to 3, and when I click again, it continue from 3.
Thank for the code!
Reply
0
0
crystal
crystal     Demetrius
This comment was minimized by the moderator on the site
Hi,
Sorry can’t help you with this, welcome to post any question about Excel to our forum: https://www.extendoffice.com/forum.html. You will get more Excel supports from our professional or other Excel fans.
Reply
Report
0
0
There are no comments posted here yet
Load More
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations