Vai al contenuto principale

Come estrarre o estrarre caratteri da destra a sinistra in una cella fino a raggiungere uno spazio in Excel?

Questo articolo parlerà dell'estrazione o dell'estrazione di caratteri da destra in una cella fino a raggiungere uno spazio per ottenere il seguente risultato nel foglio di lavoro di Excel. Una formula utile in questo articolo può risolvere questo lavoro in modo rapido e semplice.

Estrarre o estrarre i caratteri da destra in una cella fino a raggiungere uno spazio con la formula

Estrarre o estrarre i caratteri da destra in una cella fino a raggiungere uno spazio con la formula

Ecco una semplice formula che può aiutarti a estrarre i caratteri dalla cella fino a quando non viene raggiunto uno spazio, per favore fai come segue:

Inserisci questa formula: = TAGLIA (DESTRA (SOSTITUISCI (A2, "", RIPETI ("", 255)), 255)) in una cella vuota in cui si desidera ottenere il risultato, quindi trascinare il quadratino di riempimento verso il basso sulle celle in cui si desidera riempire questa formula e tutti i caratteri da destra nelle celle quando si incontra il primo spazio vengono estratti contemporaneamente, vedere screenshot:

I migliori strumenti per la produttività in ufficio

Funzioni popolari: Trova, evidenzia o identifica i duplicati   |  Elimina righe vuote   |  Combina colonne o celle senza perdere dati   |   Round senza formula ...
Super ricerca: VLookup a criteri multipli  |   VLookup a valori multipli  |   VLookup su più fogli   |   Ricerca fuzzy ....
Elenco a discesa avanzato: Crea rapidamente un elenco a discesa   |  Elenco a discesa dipendente   |  Elenco a discesa a selezione multipla ....
Gestore di colonna: Aggiungi un numero specifico di colonne  |  Sposta colonne  |  Attiva/disattiva lo stato di visibilità delle colonne nascoste  |  Confronta intervalli e colonne ...
Funzionalità in primo piano: Messa a fuoco della griglia   |  Vista di progettazione   |   Grande barra delle formule   |  Gestore di cartelle di lavoro e fogli   |  Resource Library (Testo automatico)   |  Date picker   |  Combina fogli di lavoro   |  Crittografa/decrittografa le celle   |  Invia e-mail per elenco   |  Super filtro   |   Filtro speciale (filtro grassetto/corsivo/barrato...) ...
I 15 migliori set di strumenti:  12 Testo Strumenti (aggiungi testo, Rimuovi personaggi, ...)   |   Più di 50 Grafico Tipi (Diagramma di Gantt, ...)   |   40+ Pratico Formule (Calcola l'età in base al compleanno, ...)   |   19 Inserimento Strumenti (Inserisci il codice QR, Inserisci immagine dal percorso, ...)   |   12 Conversione Strumenti (Numeri in parole, Conversione di valuta, ...)   |   7 Unisci e dividi Strumenti (Combina righe avanzate, Celle divise, ...)   |   ... e altro ancora

Potenzia le tue competenze in Excel con Kutools for Excele sperimenta l'efficienza come mai prima d'ora. Kutools for Excel Offre oltre 300 funzionalità avanzate per aumentare la produttività e risparmiare tempo.  Fai clic qui per ottenere la funzionalità di cui hai più bisogno...

scheda kte 201905

Office Tab Porta l'interfaccia a schede in Office e rende il tuo lavoro molto più semplice

  • Abilita la modifica e la lettura a schede in Word, Excel, PowerPoint, Publisher, Access, Visio e Project.
  • Apri e crea più documenti in nuove schede della stessa finestra, piuttosto che in nuove finestre.
  • Aumenta la produttività del 50% e riduce ogni giorno centinaia di clic del mouse!
Comments (17)
No ratings yet. Be the first to rate!
Mahendra Deshmukh
Mahendra Deshmukh
This comment was minimized by the moderator on the site
This is a nice piece of formula,
I took liberty to change it and it worked for me.

Considering your data between two spaces is not more than 20 characters and you need data between spaces try this.

Original Formula for last space to end 
=TRIM(RIGHT(SUBSTITUTE(A2," ",REPT(" ",255)),255))


Between 2nd last space and last space
=TRIM(LEFT(RIGHT(SUBSTITUTE(C1," ",REPT(" ",25)),50),25))


Between 3rd last space and 2nd last space

=TRIM(LEFT(RIGHT(SUBSTITUTE(C1," ",REPT(" ",25)),50),25))
Reply
0
0
Seadog
Seadog
This comment was minimized by the moderator on the site
si, solo tienes que cambiar el numero en negrella a 2 de la formula "=EXTRAE(A5;ENCONTRAR("@";SUSTITUIR(A5;" ";"@";LARGO(A5)-LARGO(SUSTITUIR(A5;" ";""))-1))+1;100)"
Reply
0
0
victor santos
victor santos
This comment was minimized by the moderator on the site
Hi, thanks so much for the help! Is there any way to do the same thing, but to pull out text from right to left until the THIRD space? It would save my life!!!!
Reply
0
0
skyyang
skyyang     victor santos
This comment was minimized by the moderator on the site
Hello, santos
To extract the text from right to left until the THIRD space, please apply the below formula:
=IF((LEN(A1)-LEN(SUBSTITUTE(A1," ","")))<3, A1, RIGHT(A1,LEN(A1)-FIND("/", SUBSTITUTE(A1," ","/", (LEN(A1)-LEN(SUBSTITUTE(A1," ",""))-2)))))


Please have a try, hope it can help you!
Reply
Report
0
0
_sbird
_sbird
This comment was minimized by the moderator on the site
I am using a similar formula =TRIM(RIGHT(SUBSTITUTE(F7," ",REPT(" ",255)),255)) which is copying the word to G7, however I would like it to remove the word from F7. Are you able to assist me with what I need to adjust in my formula?
Reply
Report
0
0
Matt
Matt
This comment was minimized by the moderator on the site
This is a great formula. I would love to understand the individual parts a bit better. Could someone provide a bit of a summary as to what each part is doing?
TRIM(RIGHT(SUBSTITUTE(A2," ",REPT(" ",255)),255))
Reply
0
0
Jason Howarth
Jason Howarth     Matt
This comment was minimized by the moderator on the site
Explanation of TRIM(RIGHT(SUBSTITUTE(A2," ",REPT(" ",255)),255))

TLDR: pad the space before the last character(s) on the right with 255 spaces, extract 255 characters from the right, then trim the space characters, leaving the desired non-text characters.

Long explanation:
1. REPT (Repeat) is adding 255 space characters. WHY? These added spaces will be inserted by SUBSTITUE.
2. SUBSTITUTE is replacing each space characters with 255 spaces (provided by REPT). WHY? This causes a cell to contain the desired characters on the right, plus 255 space characters to the left of the desired cell characters; this will be exploited by the RIGHT extraction function.
3. RIGHT is extracting the first 255 characters from the right. WHY? This extracts the desired characters on the right plus the added space characters (up to 255 characters) inserted by SUBSTITUTE.
4. TRIM is removing all space characters. WHY? This leaves only the desired characters on the right.


Caveat: This formula only works so long as the desired right text characters are <=255 characters. If the desired right text characters are >256, then the RIGHT function will miss the characters over 255.
Reply
0
0
Stuart Bass
Stuart Bass
This comment was minimized by the moderator on the site
Hi,
I had to put a Trim(A2) into mine as I had trailing blanks - otherwise works great.
Reply
0
0
russell_w
russell_w
This comment was minimized by the moderator on the site
Is there a way to extract and the result be read as a number? I am extracting the number part of an exported column that excel is reading as text. Thanks!
Reply
Report
0
0
skyyang
skyyang     russell_w
This comment was minimized by the moderator on the site
Hello, Russell,
If you need the result as number format, you should copy and paste the formula cells into other cells as values, and then convert the text format number to real number.
View Attachments (1 / 5)
Reply
Report
0
0
chethiya
chethiya
This comment was minimized by the moderator on the site
thanks a lot
Reply
0
0
Paulius
Paulius
This comment was minimized by the moderator on the site
This formula worked perfectly:
=TRIM(RIGHT(SUBSTITUTE(A2," ",REPT(" ",255)),255))

Is there any way to do the same thing, but to pullout text from right to left untill the SECOND space?
Reply
0
0
skyyang
skyyang     Paulius
This comment was minimized by the moderator on the site
Hi, Paulius,
To extract the text from right to left until the second space, you should apply the below formula:
=MID(A2,FIND("@",SUBSTITUTE(A2," ","@",LEN(A2)-LEN(SUBSTITUTE(A2," ",""))-1))+1,100)

Please try, hope it can help you!
View Attachments (1 / 5)
Reply
Report
0
0
DEREK
DEREK     skyyang
This comment was minimized by the moderator on the site
Thank you!!!!!!!!!!
Reply
0
0
Paulius
Paulius     skyyang
This comment was minimized by the moderator on the site
Thank You it worked perfectly
Reply
0
0
Rifat Tareq
Rifat Tareq
This comment was minimized by the moderator on the site
Thank you so much! Saved me a ton of time!
Reply
0
0
JH
JH     Rifat Tareq
This comment was minimized by the moderator on the site
This is close to what I need help with so I'm hoping someone can help. I need to pull over 20 characters or until the next space. how can I modify the formulas above to do that?
Reply
0
0
There are no comments posted here yet
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations