Vai al contenuto principale

Come cambiare / modificare le righe dell'oggetto dei messaggi ricevuti in Outlook?

Per motivi di ricerca semplice, coerenza con il contenuto del messaggio o altri scopi, potrebbe essere necessario modificare o cambiare l'oggetto di alcuni messaggi ricevuti in Outlook. Tuttavia, non sembra da nessuna parte che questi argomenti possano essere modificati o cambiati. In realtà Microsoft Outlook supporta questa funzionalità, e qui ti guideremo a modificare o cambiare facilmente gli oggetti dei messaggi ricevuti.

Cambia / modifica la riga dell'oggetto di un'e-mail in Outlook

Cambia / modifica la riga dell'oggetto di più email in Outlook


Scheda Office: abilita la modifica e la navigazione a schede in Microsoft Office, rendendo il lavoro un gioco da ragazzi
Kutools per Outlook: potenzia Outlook con oltre 100 funzionalità avanzate per un'efficienza superiore
Potenzia il tuo Outlook 2021-2010 o Outlook 365 con queste funzionalità avanzate. Goditi una prova gratuita completa di 60 giorni e migliora la tua esperienza di posta elettronica!

freccia blu freccia destraCambia / modifica la riga dell'oggetto di un'e-mail in Outlook

I seguenti passaggi ti guideranno a cambiare o modificare rapidamente la riga dell'oggetto di un'e-mail in Outlook. Si prega di fare quanto segue:

1. Nel posta visualizzare, fare doppio clic per aprire l'email di cui cambierà la riga dell'oggetto.

2. Ora l'email si apre nella finestra del messaggio. Fare clic su pulsante nell'angolo inferiore destro dell'intestazione del messaggio per espandere l'intestazione del messaggio. Vedi screenshot:

Note:: In Outlook 2010 o versioni precedenti, l'intestazione del messaggio è espansa per impostazione predefinita, saltare direttamente questo passaggio.

.

3. Ora l'intestazione del messaggio è espansa. Modifica direttamente la riga dell'oggetto, quindi fai clic su Risparmi pulsante. Vedi screenshot:

Finora, hai già cambiato / modificato la riga dell'oggetto dell'email specificata. Si prega di chiudere la finestra del messaggio di cui hai bisogno.


freccia blu freccia destraCambia / modifica la riga dell'oggetto di più email in Outlook

Se è necessario modificare le righe dell'oggetto di più e-mail in Outlook, il metodo sopra sarà un po 'noioso. Qui, questo metodo ti guiderà a modificare l'impostazione di visualizzazione della cartella e modificare direttamente le righe dell'oggetto delle e-mail nell'elenco dei messaggi. Si prega di fare quanto segue:

1. Nel posta visualizza, apri la cartella contenente le email di cui cambierai l'oggetto e fai clic su Visualizza > Visualizza le impostazioni. Vedi screenshot:

2. Ora viene visualizzata la finestra di dialogo Impostazioni vista avanzata, fare clic su altre impostazioni pulsante. Vedi screenshot:

3. Nella finestra di dialogo Altre impostazioni che si apre, controllare il file Consenti la modifica nella cella opzione, quindi fare clic su OK pulsanti in successione per chiudere entrambe le finestre di dialogo.

4. Ora torni alla cartella, clicca Visualizza > Riquadro di lettura > sconto per chiudere il riquadro di lettura. Vedi screenshot:

5. Ora in Elenco dei messaggi, fare clic sulla riga dell'oggetto che si desidera modificare, quindi modificarla direttamente come mostrato nell'immagine sottostante.

Quindi ripeti questo passaggio per modificare le righe dell'oggetto di più e-mail di cui hai bisogno.


I migliori strumenti per la produttività in ufficio

Kutools for Outlook - Oltre 100 potenti funzionalità per potenziare il tuo Outlook

🤖 Assistente di posta AI: E-mail istantanee professionali con la magia dell'intelligenza artificiale: risposte geniali con un solo clic, tono perfetto, padronanza multilingue. Trasforma l'e-mail senza sforzo! ...

???? Automazione di posta elettronica: Fuori sede (disponibile per POP e IMAP)  /  Pianifica l'invio di e-mail  /  CC/BCC automatico in base alle regole durante l'invio di e-mail  /  Inoltro automatico (regole avanzate)   /  Aggiunta automatica di saluto   /  Suddividi automaticamente le email con più destinatari in singoli messaggi ...

📨 gestione e-mail: Richiama facilmente le email  /  Blocca le email truffe per soggetto e altri  /  Elimina email duplicate  /  Ricerca avanzata  /  Consolidare cartelle ...

📁 Allegati ProSalvataggio in batch  /  Stacca batch  /  Comprimi in lotti  /  Salvataggio automatico   /  Scollegamento automatico  /  Comprimi automaticamente ...

🌟 Magia dell'interfaccia: 😊Più emoji carini e fantastici   /  Aumenta la tua produttività in Outlook con le visualizzazioni a schede  /  Riduci a icona Outlook invece di chiuderlo ...

👍 Meraviglie con un clic: Rispondi a tutti con gli allegati in arrivo  /   E-mail anti-phishing  /  🕘Mostra il fuso orario del mittente ...

👩🏼‍🤝‍👩🏻 Contatti e calendario: Aggiungi in batch contatti dalle email selezionate  /  Dividere un gruppo di contatti in singoli gruppi  /  Rimuovi promemoria compleanno ...

Al di sopra Caratteristiche 100 Attendi la tua esplorazione! Clicca qui per scoprire di più.

 

 

Comments (24)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
I'm aware that the date, time and such columns as those cannot be edited, but I've viewed a tutorial where a "Notes" column can be inserted and edited to contain notes the user wishes to see.  Unfortunately, my Outlook 365 allows me to add the column, and to enter edit mode, but it will not take any data ... I get an error tone.  There must be many other columns that allow the user to enter or edit data, or ... ?
This comment was minimized by the moderator on the site
Is there a way to add the same text to the beginning of all the subject lines all at once rather than needing to insert the text one at a time?  If so, can this be done with using VBA or a third-party app?
This comment was minimized by the moderator on the site
This is a huge game-changer for me. Thank you so much!!! It's a happy day! :-)
This comment was minimized by the moderator on the site
could i change date or time of incomming emails?

could i change reciefed from or sent to inthe header?

thanks
This comment was minimized by the moderator on the site
Hi Panama Smaek,
I am afraid it is impossible to change some message header information of an incoming email, such as from, to, sent time etc.
Here is a roundabout trick to change them: click to open the email in the Message window, click Message > Actions > Resent This Message, and then change the from, to as you need. And finally, save the message without sending.
This comment was minimized by the moderator on the site
Having Conversation View on is the reason Subject Lines weren't editable. When I uncheck the box in View > "Show as Conversations", I'm able to edit. However, this poses a different problem - I heavily depend on viewing my emails as Conversations. Setting this view back on, now every newly changed email shows the old subject line text. Is there a way to enforce the new subject line text for Conversations?
This comment was minimized by the moderator on the site
Step 5 is missing information. I've followed every instruction exactly; my Outlook looks just like the screen shots here. "Now in the Message List, please click the subject line you want to change, and then edit it directly as below screenshot shown" - How do you get an email Subject Line into edit mode? Selecting an email in Message List does nothing but select/highlight it. Double-clicking opens it into separate window. Right-clicking shows no option for editing. F2 shortcut on a highlighted/selected line does nothing. Just start typing - nothing. ... I'm using Office 2016. Thanks
This comment was minimized by the moderator on the site
Hi, at work we use Outlook 2010. I have tried and tried, I do change the subject of the messages, but but in the MESSAGE LIST the subject is the original one while in the READING PANEL the subject is the one I have changed. So the change is not exactly complete. I have visited other help options sites and no way, the result is always the same: subject changed in the READING PANEL and unchanged in the MESSAGE LIST. Thanks anyway.
This comment was minimized by the moderator on the site
It is because it is showing as a conversation. Remove conversation and it should work
This comment was minimized by the moderator on the site
This was great! thanks for the clear instructions
This comment was minimized by the moderator on the site
Thanks for this but my colleague, Stacey, has a strange error in that the Subject Line looks to be read only - can't edit it at all when you open the email into its own window. I understand this isn't the Microsoft site, but wondering if you would know why this is (haven't found a matching error on google yet). All our other colleagues (including myself) can open the email and edit as desired.
This comment was minimized by the moderator on the site
Please ignore - finally found out what was going on and she's sorted now
This comment was minimized by the moderator on the site
Tania, can you explain what you did to fix this. I have someone who is having the same problem.
This comment was minimized by the moderator on the site
When it says make sure you can see all of the header information, in step 2 above, we didn't have it expanded properly. The email she was working on had the window positioned so the right hand side was off the screen and she didn't see the drop down expand symbol. So I wrote my first message here thinking it was something different when it was really the same thing. Then we tried with a different email that was centered and we could see where to fix. Hope this helps :)
This comment was minimized by the moderator on the site
Oh thank you so much, this has been driving me crazy and Microsoft and even outlook help was zero help. Your pics also made it a breeze. I fee like I have won a lottery!
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations